|
GRAPHITE DESIGN - Shaft Trimming |
|
|
Shaft Installation and Trimming GuidePershing, YS+, TOUR AD (45.0"- 47.0")| Types | Products | Through- Bore | Blind-Bore | Std-Bore |
|---|
| Drivers | Pershing 55, 65, 75
YS-5+, YS-6+, YS-7+
YSQ 55, 65
Quattro Tech Md | 0.0" | 0.5" | 1.0" | | Pershing 45 | Insert 2.0" only | Butt Trim Only | | Quattro Tech, Tour AD I-65, W-60, W-70 | Insert 2.0" only | 0.0" | 0.0" | | #3 Wood | Pershing 55, 65, 75
YS-5+, YS-6+, YS-7+
YSQ 55, 65
Quattro Tech Md | 0.5" | 1.0" | 1.5" | | Pershing 45 | Insert 2.0" only | Butt Trim Only | | Quattro Tech, Tour AD I-65, W-60, W-70 | Insert 2.0" only | 0.5" | 0.5" | | #5 Wood | Pershing 55, 65, 75
YS-5+, YS-6+, YS-7+
YSQ 55, 65
Quattro Tech Md | 1.0" | 1.5" | 2.0" | | Pershing 45 | Insert 2.0" only | Butt Trim Only | | Quattro Tech, Tour AD I-65, W-60, W-70 | Insert 2.0" only | 0.5" | 1.0" |
YS Hybrid+, TOUR AD UT-55,65,85,95 Hybrid (42.0"- 44.0")| Types | Products | Standard Bore |
|---|
| Hybrid | YS Hybrid+ 85 | 15°(deg) | 19° | 23° | 27° | 31+° | | 0.0" | 0.5" | 1.0" | 1.5" | 2.0" | | Tour AD UT 55, 65, 85, 95 | Butt trim only |
G-TECH| WOOD | Driver | 3W | 4W | 5W | 7W |
|---|
| Tip Trimming - L or R Flex | 0.0" | 0.5" | 1.0" | 1.5" | 1.5" | | WOOD | Driver | 3W | 4W | 5W | 7W |
|---|
| Tip Trimming - A or S Flex | 2.0" | 2.5" | 3.0" | 3.5" | 3.5" |
| IRON | 3-IRON | 4-IRON | 5-IRON | 6-IRON | 7-IRON | 8-IRON | 9-IRON | PW |
|---|
| Tip Trimming - L or R Flex | 0.0" | 0.5" | 1.0" | 1.5" | 2.0" | 2.5" | 3.0" | 3.0" | | IRON | 3-IRON | 4-IRON | 5-IRON | 6-IRON | 7-IRON | 8-IRON | 9-IRON | PW |
|---|
| Tip Trimming - A or S Flex | 1.5" | 2.0" | 2.5" | 3.0" | 3.5" | 4.0" | 4.5" | 4.5" |
Notes - Graphite Design encourages consulting a PGA Professional or qualified clubmaker on selecting the best length shaft for your swing characteristics.
- Tip trimming is dependent on the bore depth and intended results.
- Tip trimming will increase frequency, tip stiffness and torque (amount of increase will vary depending on model.
- Always leave at least .5" of parallel tip section outside the hosel. For example: With a hosel depth of 1.5" and parallel tip length of 4", the trim should not exceed 2".
- Improper installation may affect the intended performance of the shaft.
- Warranty is for material and workmanship of products. Improper installation voids warranty of product.
|
|
Last Updated ( Friday, 08 February 2008 )
|
Technical Info 
